
Gas Safety Certificates in Peterborough
Legal gas safety inspections for landlords and homeowners. CP12 certificates issued by Gas Safe registered engineers.
Gas Safety Certificates & CP12 Inspections in Peterborough
Whether you're a landlord with a portfolio of rental properties or a homeowner who wants peace of mind, a gas safety certificate confirms that every gas appliance in your property is operating safely. Our Gas Safe registered engineers (Reg: 123456) carry out thorough CP12 inspections across Peterborough — with certificates issued on the day of your inspection.
We work with private landlords, letting agents, housing associations, and homeowners throughout Peterborough and the surrounding villages. If you need a reliable, qualified engineer who turns up on time and gets the job done properly, you're in the right place.
What We Inspect During a Gas Safety Check
Every inspection follows the procedures set out by the Health and Safety Executive and Gas Safe Register. Our engineers check:
- All gas appliances — boilers, gas fires, cookers, hobs, and water heaters
- Gas pipework, joints, and connections for leaks or deterioration
- Flue terminals and chimney paths to confirm safe removal of combustion gases
- Ventilation in rooms where gas appliances are installed
- Gas pressure and burner performance on each appliance
- Safety devices, thermocouples, and flame failure controls
- Carbon monoxide risk assessment
If we find a fault, we'll explain the issue clearly and provide an honest quote for any repair work needed. We never pressure you into unnecessary repairs.
Landlord Gas Safety — Your Legal Obligations
Under the Gas Safety (Installation and Use) Regulations 1998, every landlord in England and Wales must have a valid Gas Safety Certificate (CP12) for each rental property. This isn't optional — it's the law, and it applies whether you let a single flat or manage a large portfolio.
Key requirements landlords need to know:
- Annual renewal — certificates must be renewed every 12 months before the expiry date
- Tenant notification — a copy of the CP12 must be given to existing tenants within 28 days, or to new tenants before they move in
- Record keeping — you must keep records of each certificate for at least 2 years
- Qualified engineer only — inspections must be carried out by a Gas Safe registered engineer
Failure to comply can result in fines of up to £6,000, a criminal record, imprisonment of up to 6 months, and invalidation of your landlord insurance. If a tenant is harmed due to an unsafe gas appliance, the consequences are even more serious.
Gas Safety Certificates for Homeowners
While homeowners aren't legally required to hold a CP12, there are good reasons to book a gas safety check. If your boiler, cooker, or gas fire hasn't been inspected in over a year, you could be at risk from carbon monoxide — a colourless, odourless gas responsible for around 40 deaths a year in the UK.
A gas safety check gives you confidence that your appliances are burning correctly and your family is safe. It's especially worthwhile if you've recently moved into a property and don't know the service history of the gas appliances.
What Happens After the Inspection?
Once our engineer has completed the inspection, you'll receive your CP12 certificate on the same day. The certificate details:
- Each gas appliance inspected, including make, model, and location
- The results of safety checks carried out on each appliance
- Whether each appliance has passed or failed
- Any defects found and remedial action taken or recommended
- The engineer's Gas Safe registration number and signature
We provide both a physical copy and a digital PDF sent to your email, so landlords can easily share certificates with tenants and letting agents.
Gas Safety Certificate Pricing
Our CP12 inspections start from just £60 for a single appliance, with competitive rates for properties with multiple gas appliances. We also offer discounted packages for landlords who combine a gas safety certificate with an annual boiler service — a popular choice that saves you time and money.
For landlords with multiple properties, we offer portfolio pricing with priority scheduling and annual reminders so you never miss a renewal date. Get in touch to discuss rates for your portfolio.
Areas We Cover
We carry out gas safety inspections across Peterborough and the surrounding areas, including the city centre (PE1), Fletton, Stanground, Orton Waterville, Orton Longueville, Werrington, Bretton, Hampton, Yaxley, Market Deeping, Whittlesey, and Stamford. As a local business with over 30 years in the trade, we're usually able to offer appointments within a few days — and same-day inspections when you need them urgently.
Why Choose Peterborough Plumbers for Your Gas Safety Certificate?
- Gas Safe registered engineers (Reg: 123456) — fully qualified and insured
- 30+ years serving Peterborough landlords and homeowners
- Certificates issued on the day — no waiting around
- Digital and physical copies provided
- Competitive pricing from £60 with multi-property discounts
- Annual renewal reminders so you stay compliant
- 4.6-star Google rating from over 120 satisfied customers
- Honest, no-pressure approach if repairs are needed
Combine with a Boiler Service and Save
Many of our Peterborough landlords book a boiler service at the same time as their CP12 inspection. It makes sense — the engineer is already on site, so you save on call-out time and get both jobs done in a single visit. Ask about our combined rates when you book online or call us on 01234 567890.
Frequently Asked Questions
Landlords are legally required to obtain a new gas safety certificate every 12 months for each rental property. The inspection must be completed before the previous certificate expires. Homeowners aren't legally required to have one, but we recommend an annual check for safety.
Operating without a valid CP12 is a criminal offence for landlords. Penalties include fines of up to £6,000, imprisonment of up to 6 months, and your landlord insurance may be void. If a tenant is harmed due to an unsafe gas appliance, you could face manslaughter charges.
A typical gas safety inspection takes 30 to 60 minutes, depending on the number of gas appliances in the property. A single-appliance check is usually around 20 to 30 minutes.
Our CP12 inspections start from £60 for a single appliance. We offer discounted rates for multiple appliances and landlords with several properties. We also offer bundle pricing when combined with an annual boiler service.
Yes. Provided all appliances pass the inspection, you'll receive your CP12 certificate on the day of the visit. We provide both a physical copy and a digital PDF by email.
Absolutely. We keep a record of your certificate dates and send reminders before they're due for renewal. This is especially popular with landlords managing multiple properties who need to stay on top of compliance.





